2K Ohm Resistor 1/4W ±5% – Through-Hole Film Resistor – Pack of 10

The 2K Ohm 1/4W Film Resistor – Pack of 10 is a practical passive component for general-purpose electronic design. Its 2000Ω resistance makes it useful in a wide range of analog and digital circuits where a controlled resistance value is required.

The ±5% tolerance provides a nominal resistance range of approximately 1900Ω to 2100Ω. The 0.25W power rating makes it suitable for typical low-power electronic circuits when operated within its rated limits.

The resistor uses an axial through-hole format, allowing it to be inserted directly into breadboards or soldered onto PCBs. Because stock may include either carbon-film or metal-film construction, the physical appearance and body color may vary.

Features

• 2KΩ (2000Ω) resistance value.
• 1/4W (0.25W) power rating.
• ±5% resistance tolerance.
• Maximum working voltage: 250V.
• Axial through-hole construction.
• Suitable for breadboards and PCBs.
• Available as carbon film or metal film depending on stock.
• Blue or beige body color may vary by batch.
• Pack of 10 pieces.
• Suitable for Arduino, ESP, Raspberry Pi, and general electronics projects.

Applications

• Voltage divider circuits.
• Pull-up and pull-down configurations.
• Signal conditioning.
• Current limiting.
• LED and indicator circuits.
• Transistor and logic circuits.
• Sensor interface circuits.
• Arduino and ESP projects.
• Raspberry Pi and other embedded electronics.
• General breadboard prototyping and PCB assembly.

How to Use

1. Determine the required resistance and expected circuit current.
2. Connect the resistor between the required circuit nodes.
3. For voltage-divider applications, combine it with another appropriate resistor according to the desired output voltage.
4. Calculate the expected resistor power dissipation before operation.
5. Ensure the resistor remains within its 0.25W power rating and maximum working voltage.

Important Notes

• 1/4W (0.25W) is the maximum rated power, not a recommended continuous operating target.
• Resistors can become hot when dissipating significant power; provide adequate ventilation and clearance.
• Do not exceed the specified maximum working voltage of 250V.
• Exact resistor construction and body color may vary between carbon-film and metal-film stock.
• Resistance tolerance is ±5%.
• Product images are for illustration only and may differ from the supplied batch.
• This is a passive electronic component and does not include a manufacturer warranty against damage caused by soldering, overheating, overvoltage, or incorrect circuit design.

Package Includes

• 10 × 2K Ohm 1/4W Film Resistor