Gens Ace 7200mAh 14.8V 60C 4S1P HardCase Lipo Battery

The Gens Ace 7200mAh 14.8V 60C 4S1P HardCase LiPo Battery is designed to deliver high-capacity power for performance-focused RC vehicles. Built for compatible 1/8 and 1/10 scale RC cars, this battery combines a 7200mAh capacity with a 14.8V nominal output to support longer driving sessions and demanding motor loads.

Its 60C continuous discharge rating provides a high-current power supply, while the 140C burst rating supports short periods of increased power demand. The protective hardcase helps shield the battery cells from physical contact and impacts during RC vehicle operation.

The battery comes with a Deans (T-Plug) main connector and a JST-XHR balance connector, making it suitable for compatible RC car electronics and 4S LiPo balance chargers. Its compact rectangular design measures approximately 138 × 47 × 50mm and weighs around 617g.

Features

• 7200mAh High Capacity: Provides substantial energy for extended RC driving sessions.

• 14.8V 4S Configuration: Four cells connected in series deliver the nominal voltage required by compatible 4S RC systems.

• 60C Continuous Discharge: Supports high-current delivery for performance RC applications.

• 140C Burst Discharge: Provides additional current capability during short periods of high demand.

• Protective Hardcase: Helps protect the battery cells from physical damage during vehicle operation.

• Deans Main Connector: Features a widely used T-Plug discharge connector for compatible RC setups.

• JST-XHR Balance Connector: Allows individual cell voltage monitoring and balanced charging.

• Matched Battery Cells: Gens Ace uses cell matching processes to help maintain consistent battery performance.

• RC Car Compatibility: Designed for suitable 1/8 and 1/10 scale RC car models.

Applications

• 1/8 scale electric RC cars

• 1/10 scale electric RC cars

• RC short-course trucks

• RC monster trucks

• RC bashing vehicles

• Compatible RC racing platforms

• Other RC projects requiring a 4S hardcase LiPo battery

How to Use

1. Check that your RC vehicle supports a 4S LiPo battery with a nominal voltage of 14.8V.

2. Confirm that the battery compartment can accommodate the 138 × 47 × 50mm battery dimensions.

3. Check that the vehicle's power connector is compatible with the Deans/T-Plug connector.

4. Connect the battery securely to the vehicle's electronic speed controller (ESC).

5. Use a compatible 4S LiPo balance charger and connect the JST-XHR balance lead during charging.

6. Monitor battery voltage during operation and avoid over-discharging the cells.

7. Disconnect the battery after use and store it under appropriate LiPo storage conditions.

Important Notes

• This battery is designed for 4S-compatible RC systems. Do not connect it to equipment that only supports lower cell counts or voltage ratings.

• Verify battery dimensions, connector type, and ESC compatibility before purchasing.

• Always use a dedicated 4S LiPo balance charger.

• Never leave a charging LiPo battery unattended.

• Do not charge a swollen, punctured, damaged, or unusually hot battery.

• Avoid overcharging, over-discharging, short circuits, and excessive heat.

• Store the battery at the recommended LiPo storage voltage when not in use for extended periods.

• The 60C continuous and 140C burst ratings describe discharge capability, not recommended charging rates. Follow the battery manufacturer's charging instructions.

• The battery is intended for compatible RC applications; it is not a direct replacement for a battery with a different voltage or connector configuration.

Package Includes

- 1 × Gens Ace 7200mAh 14.8V 60C 4S1P HardCase LiPo Battery