GOOT Desoldering Wick Braid Solder Remover 3mm Width 1.5M Length (Original)
VAT inclusive; Computed calculations added locally.
Overview
GOOT 3mm Desoldering Wick Braid – 1.5M
Make solder rework cleaner and more precise with the GOOT Desoldering Wick Braid 3mm × 1.5M. This professional-style solder remover uses a finely woven copper braid to absorb molten solder from PCB pads and component joints, helping you remove unwanted solder with greater control.
Simply place the desoldering braid over the solder you want to remove and apply a suitable soldering iron. As the solder melts, it is drawn into the copper braid through capillary action, leaving the pad or joint cleaner and ready for component replacement or further soldering.
With a 3mm width and 1.5-meter length, this braid is suitable for a wide range of electronics repair and rework tasks. It can be particularly useful when correcting solder bridges, removing excess solder, cleaning PCB pads, or preparing through-hole and SMD components for replacement.
The compact format makes it convenient for electronics technicians, makers, students, repair workshops, and DIY enthusiasts.
Customer Reviews
Share your verified purchase experience with the community.
Earn Loyalty Rewards
Get 50 Points for reviewing + bonus points when upvoted!
Want to share your experience?
Sign in to leave a verified review for this product.
New here? Create a free account
Verified Comments Listing
Product Technical Information
Technical Details
Professional Solder Removal Braid
The GOOT 3mm Desoldering Wick Braid is designed to help remove unwanted or excess solder during electronics assembly and repair. It is particularly useful when a solder joint contains too much solder or when a component needs to be removed from a PCB.
3mm Width for Controlled Desoldering
The 3mm-wide copper braid provides a practical balance between solder absorption capacity and precision. It can be positioned directly over the target solder joint before heating it with a soldering iron.
The appropriate braid width depends on the size of the solder joint and PCB pad.
1.5-Meter Length
The product provides approximately 1.5 meters of desoldering braid, allowing multiple repair and rework operations from a single roll.
A small section can be cut or dispensed as required, helping reduce waste during individual solder-removal tasks.
How Desoldering Wick Works
Desoldering braid works through capillary action. When the copper braid and solder joint are heated with a soldering iron, the molten solder is drawn into the woven copper strands.
A typical process is:
- Place the braid over the unwanted solder.
- Place the heated soldering iron tip over the braid.
- Allow the solder to melt and flow into the copper braid.
- Remove the braid and soldering iron together.
- Cut off the solder-filled section before the next use.
Use an appropriate temperature and avoid excessive heating of PCB pads to reduce the risk of damaging the board.
Useful for SMD and Through-Hole Work
The braid can be used for a variety of electronics applications, including:
- Removing solder bridges
- Cleaning PCB pads
- Removing excess solder
- SMD component rework
- Through-hole component repair
- Connector rework
- PCB repair
- Removing old solder
- Preparing pads for replacement components
- Electronics prototyping
Suitable for Electronics Repair
The GOOT desoldering braid is a useful addition to an electronics workbench alongside a soldering iron, solder wire, flux, solder sucker, and other rework tools.
It is suitable for repair technicians, electronics students, engineers, makers, hobbyists, and DIY users.
Note: Desoldering braid becomes hot during use. Use appropriate eye protection and heat-resistant handling practices, and avoid prolonged heating of PCB pads or components.
Frequently Asked Questions
You May Also Like
What Engineers & Builders Say
Trusted by makers, robotics researchers, and DIY electronics enthusiasts across Bangladesh.
"The ESP32 DIY Ambilight Kit arrived within 24 hours in perfect packaging. Everything worked out of the box with flawless code support!"
Tanvir Ahmed
Robotics Engineer
"KathalTech is my go-to store for sensors, NodeMCU boards, and microcontrollers in Bangladesh. Highly reliable service and genuine components."
Nusrat Jahan
IoT Researcher
"Super fast delivery and great support. The pickup point option made it very convenient to collect my project parts after classes."
Sabbir Hossain
University Student & Hobbyist
Sign in with Google +100 PTS
Get 100 Welcome Points & track your orders seamlessly.