IFLIGHT FULLSEND 1S HV 300MAH 40C LIPO BATTERY-PH2.0- 1PCS

4. Product Description

The iFlight FULLSEND 1S HV 300mAh 40C LiPo Battery-PH2.0 is designed for lightweight FPV micro drones and small radio-controlled quadcopters. Its single-cell configuration provides a nominal voltage of 3.8V and a 300mAh capacity, making it suitable for compatible compact aircraft where battery weight and size are important.

This high-voltage LiPo battery supports charging up to 4.35V and features a JST-PH2.0 connector for compatible devices. Its elongated dimensions make it suitable for selected Tiny Whoop models, including the iFlight Alpha A65. Before use, verify your drone's supported battery voltage, connector, and battery compartment dimensions.

5pcs

+1

Features

• 300mAh capacity: Designed for compact FPV drones and lightweight RC projects.

• 1S HV configuration: Single-cell high-voltage LiPo battery with a 3.8V nominal voltage.

• 40C discharge rating: Designed for compatible applications requiring high current relative to battery capacity.

• 60C burst rating: Manufacturer-listed short-duration burst discharge capability.

• JST-PH2.0 connector: Provides a power connection for compatible 1S drone systems.

• Lightweight construction: Approximately 8.1g for weight-sensitive micro-drone builds.

• Compact elongated design: Measures approximately 65 × 11 × 6mm.

• FPV compatibility: Designed for suitable Tiny Whoop and micro FPV quadcopter applications.

Applications

• iFlight Alpha A65 Tiny Whoop, subject to fit and compatibility

• Compatible 1S micro FPV drones

• Small indoor FPV quadcopters

• Lightweight RC aircraft projects

• Compatible micro-drone replacement battery applications

How to Use

1. Confirm that your drone supports a 1S high-voltage LiPo battery.

2. Check that the JST-PH2.0 connector and battery dimensions match your device.

3. Connect the battery with the correct polarity.

4. Charge using a compatible HV LiPo charger with a 4.35V setting.

5. Monitor the battery during charging and operation.

6. Disconnect after use and follow the manufacturer's recommended storage procedure.

Important Notes

• This is an HV LiPo battery with a maximum charging voltage of 4.35V. Do not use a standard charging profile unless it is explicitly compatible with this battery.

• Never exceed the specified charging voltage or discharge limits.

• Always supervise charging and use a non-flammable charging surface.

• Avoid short circuits, punctures, crushing, and excessive heat.

• Stop using the battery if it becomes swollen, damaged, or unusually hot.

• The 40C and 60C ratings are stated discharge ratings, not guarantees of current under every operating condition.

• Check the connector polarity before connecting the battery to your drone.

Package Includes

- 1 × iFlight FULLSEND 1S HV 300mAh 40C LiPo Battery with JST-PH2.0 Connector