iSDT Q6 Nano BattGo 200W 8A 1-6S Smart Charger

The iSDT Q6 Nano BattGo 200W 8A 1–6S Smart Charger is a compact DC charger designed for charging and maintaining rechargeable batteries used in RC vehicles, FPV drones, model aircraft, and other hobby electronics. Its 200W maximum charging power and adjustable charging current up to 8A provide flexible charging options for compatible battery packs.

Supporting LiPo, LiHV, Li-ion, and LiFe batteries from 1S to 6S, the Q6 Nano can also handle supported lead-acid and NiMH/NiCd battery configurations. Its balance charging function helps monitor and equalize individual cell voltages in compatible lithium battery packs, while the storage mode helps prepare batteries for storage.

Features

• 200W charging capability: Provides up to 200W maximum charging power, depending on the input supply and operating conditions.

• Adjustable charging current: Set the charging current between 0.1A and 8A according to the battery's specifications.

• Multi-chemistry support: Compatible with LiPo, LiHV, Li-ion, LiFe, Pb, and NiMH/NiCd batteries within the specified cell-count limits.

• 1S–6S lithium battery support: Charges supported lithium battery packs from single-cell to six-cell configurations.

• Balance charging: Monitors individual cell voltages and helps balance cells in compatible lithium packs when the balance connector is connected.

• BattGo compatibility: Automatically configures certain battery parameters when a compatible BattGo battery is connected.

• Battery storage mode: Offers a dedicated function for bringing compatible batteries to an appropriate storage voltage.

• Discharging function: Supports controlled battery discharging, with a maximum discharge power of 10W.

• Compact and lightweight: Measures approximately 72 × 72 × 32mm and weighs around 120g.

• DC power supply mode: Can provide adjustable DC output when used in the designated power-supply mode.

Applications

• FPV racing and freestyle drone battery charging

• RC cars, trucks, boats, and model aircraft

• LiPo and LiHV battery maintenance

• Li-ion and LiFe battery charging within supported configurations

• Battery storage preparation and routine hobby battery care

• Electronics and RC hobby workshops

How to Use

1. Connect a suitable external DC power supply rated for the charger's 10–30V input range.

2. Power on the charger and connect the battery using the appropriate charging connector.

3. For lithium balance charging, connect the battery's balance lead to the correct balance port.

4. Select the correct battery chemistry, cell count, charging mode, and current.

5. Verify that the selected settings match the battery manufacturer's specifications before starting.

6. Monitor the charging process and disconnect the battery after charging is complete.

Important Notes

• This is a DC-input charger; it does not connect directly to household AC mains. Use a compatible external DC power supply.

• The 200W rating is a maximum, not a guarantee that every battery will charge at 200W. Available power depends on the input supply and charging conditions.

• Never exceed the battery manufacturer's recommended charging current or voltage.

• Use balance charging for lithium packs when applicable, and connect the correct balance lead.

• Never leave batteries charging unattended. Charge on a non-flammable surface away from heat, moisture, and combustible materials.

• Confirm connector compatibility and the exact product version before use.

Package Includes

- 1 × iSDT Q6 Nano BattGo Smart Charger