SpeedyBee Mario 5 Frame Kit – XH Advanced

The SpeedyBee Mario 5 Frame Kit – XH Advanced is a 5-inch FPV drone frame designed for freestyle flying, racing, and custom quadcopter development. Its symmetrical XH configuration provides a balanced frame layout, making it suitable for pilots who want responsive control and consistent performance during freestyle maneuvers.

Constructed from T300 3K carbon fiber, the frame features 2.5mm top and bottom plates, a 2mm middle plate, and 6mm thick arms. These structural components provide a durable foundation for mounting motors, flight controllers, ESCs, cameras, receivers, and other FPV electronics.

The frame has a 226mm wheelbase and supports propellers up to 5.1 inches. Its 30.5 × 30.5mm M3 flight controller mounting pattern accommodates many standard FPV flight controller and ESC stacks. Additional mounting options support compatible VTX systems, GPS modules, and receivers.

The aviation aluminum alloy front section and 7075 aluminum standoffs provide additional structural support. A 3mm silicone battery pad helps prevent battery movement, while yellow TPU printed components provide protection and practical mounting support.

The Mario 5 XH Advanced is supplied as a frame kit and requires assembly. Motors, flight controller, ESC, battery, propellers, receiver, camera, and video transmission equipment must be purchased separately unless specified by the seller.

Features

• 5-inch FPV drone frame with symmetrical XH configuration.

• Constructed from durable T300 3K carbon fiber.

• 6mm thick arms for structural support.

• 226mm wheelbase for a balanced quadcopter layout.

• Supports propellers up to 5.1 inches.

• Aviation aluminum alloy front section.

• 7075 aluminum alloy standoffs.

• Standard 30.5 × 30.5mm M3 flight controller mounting.

• Supports 20 × 20mm and 25.5 × 25.5mm VTX mounting patterns.

• Compatible with 19mm and 20mm FPV cameras.

• Dedicated mounting space for GPS and receiver components.

• 3mm silicone battery anti-slip pad.

• Yellow TPU 3D-printed components.

• Internal mounting height of 23–31mm.

• Suitable for custom freestyle and FPV drone builds.

Applications

• 5-inch FPV freestyle drones.

• FPV racing quadcopters.

• DJI digital FPV builds with compatible equipment.

• Analog FPV drone development.

• Custom UAV and quadcopter projects.

• Drone electronics prototyping.

• Recreational FPV flying.

• Replacement or upgrade frame for compatible 5-inch builds.

How to Use

1. Assemble the carbon fiber plates, arms, aluminum standoffs, and mounting hardware according to the frame layout.

2. Install compatible brushless motors using the motor mounting holes.

3. Mount the flight controller and ESC stack using the 30.5 × 30.5mm M3 mounting pattern.

4. Install the FPV camera in the front camera mounting section.

5. Mount the compatible VTX or digital video system in the designated mounting area.

6. Install the receiver and GPS module using their dedicated mounting spaces.

7. Secure the battery using the silicone anti-slip pad and an appropriate battery strap.

8. Connect the electronics according to their respective wiring diagrams.

9. Check all screws, motor mounting points, wiring, and component clearances before powering the drone.

10. Complete flight controller configuration and test the aircraft without propellers before the first flight.

Important Notes

• This is a frame kit, not a complete ready-to-fly drone.

• Assembly is required.

• The XH configuration uses symmetrical X geometry; propellers may be visible in the FPV camera view.

• Maximum supported propeller size is approximately 5.1 inches. Confirm propeller clearance before installation.

• Check motor mounting dimensions and screw lengths to avoid damaging motor windings.

• Verify flight controller, ESC, camera, VTX, and GPS dimensions before purchasing components.

• The 30.5 × 30.5mm M3 mounting pattern should be checked against the selected electronics.

• Use suitable battery straps and ensure the battery is firmly secured.

• Inspect carbon fiber arms and plates for cracks or damage after hard impacts.

• Carbon fiber is electrically conductive. Protect exposed electronic connections and wiring from contact with the frame.

• Product weight varies depending on whether the 3D-printed components are included.

Package Includes

- 1 × SpeedyBee Mario 5 Frame Kit – XH Advanced