Turnigy 3000mAh 3S 20C Lipo Pack w/XT-60

The Turnigy 3000mAh 3S 20C LiPo Pack with XT-60 is designed to provide reliable rechargeable power for compatible radio-controlled vehicles, model aircraft, and electronics projects. Its 3S1P configuration uses three cells connected in series, delivering a nominal voltage of 11.1V and a fully charged voltage of 12.6V.

With a minimum capacity of 3000mAh, this battery offers a useful balance of energy storage and discharge capability for hobby applications. Its 20C continuous discharge rating supports moderate-to-high current requirements within the manufacturer's operating limits. The XT60 main connector and JST-XH balance connector provide power and balancing connections for compatible equipment and chargers.

Features

• 3000mAh Capacity: Provides energy for compatible RC and electronics applications.

• 3S1P Configuration: Three cells in series deliver 11.1V nominal voltage.

• 20C Continuous Discharge: Designed for applications requiring a suitable continuous current supply.

• 30C Peak Discharge: Listed for short bursts of up to 10 seconds.

• XT60 Connector: Enables connection to compatible power leads and electronic speed controllers.

• JST-XH Balance Connector: Supports individual-cell balancing during charging.

• Compact Pack Dimensions: Approximately 137 × 43 × 19mm, suitable for compatible battery compartments.

Applications

• RC cars and trucks

• RC boats

• Model airplanes and compatible RC aircraft

• Robotics projects requiring a 3S LiPo supply

• DIY electronics and portable hobby systems designed for 11.1V input

How to Use

1. Verify that your equipment supports a 3S LiPo battery and an 11.1V nominal supply.

2. Check the battery compartment dimensions and XT60 connector compatibility.

3. Charge using a compatible 3S LiPo balance charger connected to the appropriate balance plug.

4. Inspect the battery and wiring before use, and ensure that the connectors are correctly polarized.

5. Disconnect the battery after operation and store it according to the manufacturer's recommendations.

Important Notes

• The fully charged voltage is 12.6V. Never exceed the manufacturer's charging limits.

• The listed maximum charge rate is 2C, equivalent to 6A for a 3000mAh battery. Follow the exact product label and charger instructions.

• The 20C rating corresponds to a theoretical continuous current of 60A; this calculation does not guarantee safe operation at that current in every setup.

• Avoid short circuits, punctures, crushing, overheating, overcharging, and excessive discharge.

• Never leave a LiPo battery unattended while charging.

• Stop using the battery if it becomes swollen, damaged, unusually hot, or shows signs of leakage.

• Confirm the dimensions and connector type before ordering to ensure compatibility with your device.

Package Includes

- 1 × Turnigy 3000mAh 3S 20C LiPo Battery Pack with XT-60 Plug