Turnigy High Capacity 8000mAh 6S 12C w/XT90

The Turnigy High Capacity 8000mAh 6S 12C LiPo Battery with XT90 is designed for RC and UAV systems that need substantial energy capacity for longer operating sessions. Its six-cell configuration provides a nominal voltage of 22.2V, making it suitable for compatible multirotor platforms, aerial photography drones, and other applications designed for 6S LiPo batteries. With an 8000mAh capacity and a moderate 12C continuous discharge rating, this battery emphasizes energy storage and endurance. The XT90 connector provides the main power output, while the JST-XH balance connector supports balanced charging of the individual cells.

Features

• High 8000mAh capacity: Provides substantial stored energy for compatible RC and UAV systems.

• 6S LiPo configuration: Supplies 22.2V nominal voltage for equipment designed for six-cell LiPo batteries.

• 12C continuous discharge: Supports applications with suitable current requirements.

• 24C burst rating: Supports short-duration peak discharge of up to 10 seconds according to the listed specification.

• XT90 power connector: Designed for compatible high-current power connections.

• JST-XH balance connector: Enables cell balancing with a compatible balance charger.

• Endurance-focused design: Suitable for multirotor platforms where longer operating time is a priority.

Applications

• Multirotor drones and compatible UAV platforms

• Aerial photography and video drones

• FPV platforms designed for 6S batteries

• RC projects requiring a 22.2V LiPo battery

• Other compatible systems that meet the battery's voltage, current, connector, and size requirements

How to Use

1. Check compatibility: Confirm that your device supports a 6S, 22.2V nominal LiPo battery and can safely accommodate its dimensions and weight.

2. Inspect the battery: Check the pack, wires, connectors, and insulation for damage before connecting it.

3. Connect correctly: Attach the XT90 connector to a compatible power input, ensuring correct polarity.

4. Charge safely: Use a dedicated LiPo balance charger configured for 6S batteries and follow the manufacturer's charging limits. The listed maximum charge rate is 1C, equivalent to 8A for this battery.

5. Monitor during operation: Avoid over-discharging the pack and follow the voltage limits recommended by the battery and equipment manufacturers.

6. Store properly: For longer periods of storage, use the storage-charge setting on a compatible LiPo charger.

Important Notes

• This battery is intended for 6S-compatible equipment only. Do not connect it to a system that requires a different voltage or cell count.

• The 12C discharge rating makes it more suitable for endurance-focused applications than demanding high-current racing setups.

• The 96A continuous current figure is calculated from the stated capacity and discharge rating; actual safe operating current also depends on the battery's condition, temperature, and manufacturer limits.

• Never charge unattended, puncture, crush, short-circuit, or expose the battery to excessive heat.

• Stop using the battery if it becomes swollen, damaged, unusually hot, or otherwise abnormal.

• Confirm connector polarity and physical fit before installation.

Package Includes

- 1 × Turnigy High Capacity 8000mAh 6S 12C LiPo Battery with XT90 connector