Turnigy Rapid 5000mAh 3S (11.1V) 100C LiPo Battery Pack w/XT90 Connector For RC Cars

The Turnigy Rapid 5000mAh 3S (11.1V) 100C LiPo Battery Pack with XT90 Connector is designed for high-performance RC cars and other compatible surface vehicles. Its three-cell configuration delivers 11.1V nominal voltage, reaching 12.6V when fully charged. The 5000mAh capacity provides 55.5Wh of nominal energy for compatible RC applications.

The Rapid series is designed for racing and demanding driving conditions where strong power delivery is important. Precision-matched cells, heavy-duty silicone wiring, and a high-current XT90 connector help support demanding RC power systems. The JST-XH balance connector allows individual cell balancing when used with a compatible charger.

Features

• 5000mAh Capacity: Provides substantial energy storage for compatible RC vehicles.

• 3S Configuration: Three cells in series deliver 11.1V nominal output.

• 100C Continuous Discharge Rating: Designed for high-current applications within the manufacturer's operating limits.

• Up to 200C Burst Rating: Manufacturer-listed peak discharge capability for short-duration demands.

• XT90 Connector: Heavy-duty power connector for compatible RC systems.

• 10AWG Discharge Cable: Thick wiring designed to support high-current power delivery.

• JST-XH Balance Connector: Enables cell balancing during charging.

• Precision-Matched Cells: Designed to provide balanced cell characteristics within the battery pack.

• RC Racing Design: Suitable for compatible touring, drift, off-road, and bashing vehicles.

Applications

• RC racing cars

• RC drift cars

• RC monster trucks and off-road vehicles

• Compatible RC buggies and truggies

• Other surface RC models designed for 3S LiPo batteries and XT90 connectors

How to Use

1. Confirm that your RC vehicle and ESC support a 3S LiPo battery with an 11.1V nominal voltage.

2. Check the battery compartment dimensions and ensure the XT90 connector matches your power system.

3. Use a compatible 3S LiPo balance charger with the JST-XH balance lead.

4. Inspect the battery, cables, and connectors for damage before connecting it.

5. Secure the battery properly in the vehicle and keep wires away from moving parts.

6. Disconnect the battery after driving and follow the manufacturer's storage recommendations.

Important Notes

• The fully charged voltage of this standard 3S LiPo battery is 12.6V. Do not charge it beyond the manufacturer's specified limit.

• Use a suitable balance charger and never leave the battery unattended while charging.

• The 100C rating corresponds to a theoretical current of 500A based on capacity multiplied by the C-rating. This calculation is not a guarantee of safe continuous current in every setup.

• The burst rating of up to 200C is a manufacturer-listed peak specification, not a continuous operating rating.

• Confirm that the ESC, motor, wiring, and connectors can safely handle the current required by your vehicle.

• Avoid short circuits, punctures, crushing, overheating, overcharging, and excessive discharge.

• Do not use the battery if it becomes swollen, damaged, unusually hot, or shows signs of leakage.

• This battery is designed primarily for demanding surface RC applications; follow manufacturer guidance before using it for prolonged high-load applications such as aircraft.

Package Includes

- 1 × Turnigy Rapid 5000mAh 3S 11.1V 100C LiPo Battery Pack with XT90 Connector