Tattu NMC 20000mAh 6S 5C 22.2V Lipo Battery Pack with XT90S Plug

The Tattu NMC 20000mAh 6S 5C 22.2V LiPo Battery Pack with XT90S Plug is designed for professional and industrial drone platforms that require high energy capacity for extended missions. Its 6S1P configuration provides a nominal voltage of 22.2V and a minimum capacity of 20,000mAh, making it suitable for compatible UAVs used in aerial mapping, surveying, infrastructure inspection, and other endurance-focused operations.

This battery uses NMC semi-solid battery technology, marketed for high energy density and reduced weight compared with certain conventional battery packs of similar capacity. The XT90S anti-spark discharge connector supports a secure main power connection, while the JST-XHR-7P balance connector supports cell monitoring and balancing during compatible charging procedures.

With a 5C discharge rating, this pack is intended for applications whose power requirements align with its specifications. Before installation, verify the battery's dimensions, weight, connector, and voltage compatibility with your drone or power system.

Features

• High 20,000mAh capacity: Provides substantial stored energy for compatible UAV platforms.

• 6S1P configuration: Delivers 22.2V nominal voltage for systems designed for 6S batteries.

• NMC semi-solid technology: Designed to provide high energy density for endurance-oriented applications.

• 5C discharge rating: Suited to compatible platforms with moderate power demands.

• XT90S anti-spark connector: Helps reduce connector sparking during connection when used correctly.

• JST-XHR-7P balance connector: Supports cell balancing with a compatible charger.

• Professional UAV applications: Designed for use in mapping, surveying, inspection, and similar drone operations.

Applications

• Professional multirotor and UAV platforms

• Aerial mapping and land surveying

• Infrastructure and industrial inspection

• Compatible drone delivery systems

• Aerial photography platforms with suitable power requirements

• Other equipment specifically designed for a 6S, 22.2V battery pack

How to Use

1. Check compatibility: Confirm that your drone supports a 6S battery with 22.2V nominal voltage and can accommodate the pack's dimensions and weight.

2. Inspect the battery: Check the casing, wires, and connectors for damage before installation.

3. Connect the power lead: Connect the XT90S plug to a compatible power connector, ensuring correct polarity.

4. Use a compatible charger: Follow Tattu's charging instructions and use a charger suitable for this specific battery chemistry and 6S configuration. Tattu lists its TA1000 charger as a matching option.

5. Monitor cell condition: Use compatible cell monitoring and balancing procedures during charging.

6. Store safely: Follow the manufacturer's storage guidance and keep the battery away from heat, moisture, physical damage, and conductive materials.

Important Notes

• This is a 6S battery pack. Do not connect it to equipment that is not designed for its voltage and power characteristics.

• The 5C rating corresponds to a calculated current of 100A at 20Ah capacity; actual permissible current depends on the manufacturer's specifications and operating conditions.

• The XT90S connector does not eliminate all electrical hazards. Always verify polarity and connector compatibility before connecting.

• Use a charger approved for the battery's chemistry, cell configuration, and charging limits. Do not assume that every standard LiPo charging profile is suitable for this NMC semi-solid pack.

• Never charge unattended or use a swollen, damaged, or unusually hot battery.

• Confirm the physical dimensions and weight against your aircraft's battery compartment and payload limits before purchase.

Package Includes

- 1 × Tattu NMC 20000mAh 6S 5C 22.2V Battery Pack with XT90S Plug