Turnigy 3300mAh 4S 30C Lipo Pack XT-60

The Turnigy 3300mAh 4S 30C LiPo Battery Pack XT-60 is a rechargeable battery designed to power compatible radio-controlled vehicles and model aircraft. Its 4S1P configuration consists of four cells connected in series, delivering a nominal voltage of 14.8V and a capacity of 3300mAh.

With a 30C continuous discharge rating, this battery is intended for RC applications that need a suitable balance of capacity and power output. The XT-60 connector provides the main power connection, while the JST-XH balance connector allows compatible chargers to monitor individual cell voltages during balancing. HobbyKing +1

With a 30C continuous discharge rating, this battery is intended for RC applications that need a suitable balance of capacity and power output. The XT-60 connector provides the main power connection, while the JST-XH balance connector allows compatible chargers to monitor individual cell voltages during balancing.

Features

• 3300mAh capacity: Provides 3.3Ah of rated battery capacity for compatible RC equipment.

• 14.8V nominal output: Four-cell series configuration for systems designed for 4S LiPo batteries.

• 30C continuous discharge: Supports high-current applications within the battery's rated operating limits.

• 40C peak discharge: Listed for short bursts of up to 10 seconds; follow manufacturer limits.

• XT-60 connector: Provides the main battery power connection.

• JST-XH balance connector: Supports balanced charging with a compatible charger.

• Rechargeable LiPo design: Suitable for repeated use when charged, operated, and stored correctly.

Applications

• RC cars and trucks

• Radio-controlled boats

• RC drones and multirotor projects that support 4S batteries

• Model airplanes and other RC aircraft

• Robotics and mobile platforms designed for 14.8V battery packs

• Compatible high-current hobby electronics

How to Use

1. Check that your device supports a 4S LiPo battery with a nominal voltage of 14.8V.

2. Verify the battery dimensions, connector type, and current requirements of your equipment.

3. Connect the XT-60 plug with correct polarity and ensure the connection is secure.

4. Charge the battery using a compatible LiPo balance charger configured for 4S batteries.

5. Monitor cell voltages and battery temperature during charging and operation.

6. Disconnect the battery after use and store it at the recommended LiPo storage voltage if it will not be used for an extended period.

Important Notes

• A fully charged 4S LiPo battery reaches approximately 16.8V. Make sure your device can tolerate this voltage.

• Never charge the battery using an incompatible charger or leave it charging unattended.

• Avoid short circuits, reversed polarity, punctures, crushing, and excessive heat.

• Stop using the battery if it becomes swollen, damaged, unusually hot, or shows signs of leakage.

• Use a suitable low-voltage cutoff to help prevent excessive discharge.

• The 30C and 40C ratings are manufacturer-listed discharge ratings; actual safe performance depends on battery condition and operating conditions.

• Do not exceed the specified charging rate. Confirm the maximum permitted charge rate on the battery label or current manufacturer documentation.

Package Includes

- 1 × Turnigy 3300mAh 4S 30C LiPo Battery Pack with XT-60 Connector