Turnigy 2200mAh 3S 11.1V 30C Shorty LiPo Battery Pack with XT60 Connector – Compact RC Battery

The Turnigy 2200mAh 3S Shorty LiPo Battery Pack combines a compact physical design with the capacity and voltage required by many RC applications. Measuring approximately 80 × 27 × 32mm and weighing 147g, it is designed for battery compartments where available length is limited. The manufacturer lists the 2200mAh capacity, 30C discharge rating, XT60 connector, and JST-XH balance connector for this model.

Features

• 2200mAh rechargeable LiPo battery

• 3S1P configuration with 11.1V nominal output

• 30C advertised continuous discharge rating

• Compact Shorty form factor

• XT60 main power connector

• JST-XH balance charging connector

• Heavy-duty 12AWG discharge cable

• Separate balance lead for cell monitoring

• Suitable for compatible compact RC vehicles and aircraft

• Compact 80mm length for restricted battery compartments

Applications

• RC airplanes and model aircraft

• RC cars and trucks

• Small drones with compatible power requirements

• RC hobby projects

• Robotics requiring a compatible 3S battery supply

• Portable high-current electronics

• Other equipment designed for an 11.1V nominal LiPo battery

How to Use

1. Check compatibility: Confirm that your device supports a 3S LiPo battery and its fully charged voltage of 12.6V.

2. Connect the main lead: Use the XT60 connector with a compatible ESC, power distribution board, or device.

3. Charge safely: Use a dedicated 3S LiPo balance charger with the correct charge settings.

4. Connect the balance lead: Use the JST-XH connector with a compatible balance charger.

5. Monitor cell voltage: Check individual cell voltages during charging and storage.

6. Secure the battery: Prevent the pack from moving or being punctured during vehicle operation.

7. Disconnect after use: Follow the battery and equipment manufacturer's instructions for storage and handling.

Important Notes

• Never charge this battery with a standard TP4056 single-cell charger. It requires a charger designed for a 3S LiPo pack.

• A 3S LiPo battery has a nominal voltage of 11.1V and reaches approximately 12.6V when fully charged.

• The theoretical current calculated from 2200mAh × 30C is 66A. This is a rating-based calculation, not a guarantee that the battery can safely supply 66A continuously under every condition.

• Use an ESC, wiring, and connectors rated for the expected voltage and current.

• Do not short-circuit, puncture, crush, overcharge, or reverse-connect the battery.

• Stop using the pack if it becomes swollen, damaged, unusually hot, or shows signs of leakage.

• Charge on a non-flammable surface in a suitable, supervised charging area.

• Do not leave a charging LiPo battery unattended.

• If connecting two packs in series or parallel, ensure compatibility and use the appropriate setup and charging arrangements. Incorrectly connecting mismatched packs can cause dangerous current flow or battery damage.

• Actual runtime depends on the load, current draw, equipment efficiency, and usable discharge level.

Package Includes

- 1 × Turnigy 2200mAh 3S 11.1V 30C Shorty LiPo Battery Pack with XT60 Connector

Smaller, Lighter, NO Compromise.

Experience the next evolution in LiPo batteries with the Turnigy 2200mAh 3S Shorty.

Our shorty pack is 25% shorter than the standard 2200mAh 3S.

20% lighter, more power with less weight for better performance!

This battery delivers unmatched energy density at 208 Wh/kg per naked cell.

Designed for maximum versatility, the Shorty pack is ideal and will most likely fit smaller-scale RC.

Need more capacity or voltage?

Combine two Shorty packs with a parallel or series adapter for 4400mAh at 3S (parallel) or 2200mAh at 6S (series).
No other battery on the market offers this power density and flexibility level.