What is the Voltage Detection Sensor Module 25V?

The Voltage Detection Sensor Module 25V is a DC voltage measurement module designed to scale down input voltages up to approximately 25V for measurement by a compatible microcontroller.

What is the maximum voltage that this module can measure?

This module is typically designed to measure DC input voltages up to approximately 25V. Do not exceed the rated input voltage.

How does the 25V voltage sensor module work?

The module uses a resistor voltage divider circuit to reduce the input voltage to a lower analog voltage that can be measured by a compatible microcontroller.

What is the output of the Voltage Detection Sensor Module?

The module provides a scaled analog voltage output that can be connected to a compatible analog-to-digital converter or ADC input.

Can I use the 25V voltage sensor with Arduino?

Yes, the module can be used with compatible Arduino boards to measure DC voltage through an analog input.

Can I use this voltage sensor module with ESP32?

Yes, but you must ensure that the module output voltage does not exceed the safe ADC input range of the ESP32. Additional voltage scaling may be required depending on the application.

Can I use the 25V voltage sensor for battery monitoring?

Yes, it can be used to monitor compatible battery voltages as long as the voltage remains within the module's supported input range.

What is the typical voltage division ratio of this module?

Many 25V voltage sensor modules use a typical 5:1 voltage divider ratio, but the exact ratio should be verified from the specifications or markings of the specific module.

Can this module measure AC voltage?

This type of standard voltage detection module is generally intended for DC voltage measurement. Do not use it for AC voltage measurement unless the specific module is explicitly designed for that purpose.

What is the price of the Voltage Detection Sensor Module 25V?

The current price of the Voltage Detection Sensor Module 25V is ৳80. Please check KathalTech for the latest price and product availability.

Voltage Detection Sensor Module 25V

Name: Voltage Detection Sensor Module 25V
Brand: KathalTech
SKU: voltage-detection-sensor-module-25v
Price: 80.00 BDT
Availability: InStock
Rating: 5.0 (1 reviews)

0.0 (0 Reviews)

৳80.00

VAT inclusive; Computed calculations added locally.

The Voltage Detection Sensor Module 25V is a compact voltage monitoring module designed to measure and detect DC voltage levels up to 25V. Using a resistor voltage divider circuit, it allows higher DC voltages to be safely scaled down for measurement by compatible microcontrollers such as Arduino, ESP32, STM32, and other development boards.

In Stock & Ready to Ship 15 watching

Delivery Rates Express

Inside Dhaka: ৳70 (2-4 Business Days)

Outside Dhaka: ৳122 (3-5 Days)

COD available 100% Genuine

Jump to: Overview Description Specifications Reviews (0) FAQs (10)

Overview

Monitor DC voltage easily in your electronics and embedded projects with the Voltage Detection Sensor Module 25V. This compact and practical module is designed to detect and measure DC voltages up to approximately 25V, making it useful for battery monitoring, power supply measurement, solar projects, and other voltage sensing applications.

The module uses a resistor voltage divider to reduce the input voltage to a lower level suitable for connection with a microcontroller's analog input. This allows compatible development boards to monitor voltages higher than their normal ADC input range.

The 25V Voltage Detection Sensor Module is commonly used with Arduino and other microcontroller platforms for measuring battery voltage, monitoring external power supplies, and developing voltage sensing systems.

Get the Voltage Detection Sensor Module 25V from KathalTech for your next Arduino, ESP32, STM32, robotics, or DIY electronics project.

Customer Reviews

Share your verified purchase experience with the community.

Earn Loyalty Rewards

Get 50 Points for reviewing + bonus points when upvoted!

Want to share your experience?

New here? Create a free account

Verified Comments Listing

The Voltage Detection Sensor Module 25V is a simple and useful module designed for measuring higher DC voltages with a compatible microcontroller. It is commonly used in Arduino and embedded electronics projects where the voltage being measured is greater than the direct analog input range of the controller.

The module works using a resistor voltage divider circuit. The input voltage is scaled down before being sent to the analog output pin. In a typical 25V voltage sensor module with a 5:1 voltage division ratio, an input voltage of 25V is reduced to approximately 5V at the output.

This allows compatible microcontrollers to read the scaled analog voltage through an ADC pin. The original input voltage can then be calculated in software based on the module's voltage division ratio and ADC reference voltage.

Key Features

Measures and monitors DC voltage
Maximum input voltage up to approximately 25V DC
Analog voltage output
Uses a resistor voltage divider circuit
Typically provides a 5:1 voltage division ratio
Compact and easy-to-use module
Suitable for microcontroller-based projects
Useful for battery voltage monitoring
Ideal for power supply measurement
Suitable for DIY electronics and embedded systems

Applications

Battery voltage monitoring
DC power supply measurement
Arduino voltage sensing projects
ESP32 voltage monitoring
STM32 embedded projects
Solar power monitoring
Robotics projects
Portable electronics
Power management systems
DIY electronics experiments

How It Works

The voltage sensor module reduces the input voltage using a resistor divider network. The microcontroller reads the lower analog voltage and calculates the original input voltage.

For example, with a typical 5:1 voltage divider ratio:

Input Voltage = Analog Output Voltage × 5

The exact calculation depends on the ADC reference voltage, ADC resolution, module design, and calibration.

Important Notes

This module is intended for DC voltage measurement within its supported range.
Do not exceed the maximum input voltage rating.
The output voltage must remain within the safe analog input range of your microcontroller.
ESP32 and other 3.3V microcontrollers may require additional consideration because their ADC input voltage limits differ from 5V Arduino boards.
Actual resistor values and module specifications may vary by manufacturer or production batch.

Product Name	Voltage Detection Sensor Module 25V
Product Type	DC Voltage Detection and Measurement Module
Maximum Input Voltage	Up to 25V DC
Operating Principle	Resistor Voltage Divider
Output Type	Analog Voltage Signal
Voltage Conversion Ratio	Typically 5:1
Suitable Controllers	Arduino, ESP32, STM32 and Other Compatible Microcontrollers
Primary Application	DC Voltage Monitoring and Measurement
Applications	Battery Monitoring, Power Supply Measurement, Solar and DIY Electronics