KAWH 900M-T-SK Soldering Iron Tip – 900M Series Black Tip for 936 Soldering Stations

The KAWH 900M-T-SK Soldering Iron Tip is a replacement tip designed for soldering irons and stations that use the compatible 900M series tip format. It is intended for electronics technicians, hobbyists, students, repair professionals, and DIY users who need a replacement tip for routine soldering work.

The tip uses a heat-resistant copper construction designed to transfer heat efficiently from the soldering iron heater to the working area. The plated exterior helps protect the tip and allows solder to wet the working surface more easily when properly tinned.

The SK-style tip provides a relatively fine working point, making it useful for detailed electronics soldering while remaining practical for general-purpose connections. It can be used for PCB assembly, component replacement, wire soldering, electronic repair, and prototyping.

Before purchasing, make sure your soldering iron uses a compatible 900M-type tip. Tip compatibility depends on the physical tip design and heater assembly, so not every soldering iron with a similar appearance will necessarily be compatible.

Features

• 900M series replacement soldering iron tip
• Model: 900M-T-SK
• High-strength, heat-resistant copper construction
• Plated working surface for improved solder wetting
• Easy to tin when properly heated and maintained
• Designed for reliable heat transfer
• Suitable for detailed and general-purpose soldering
• Compatible with many 900M-type soldering irons
• Suitable for compatible 936, 937, 938, 942, 907 and 908 series stations
• Useful for electronics repair, PCB assembly, DIY and hobby projects
• Replaceable design helps extend the useful life of compatible soldering irons

Applications

• PCB soldering and assembly
• Electronic component replacement
• Mobile and small electronics repair
• Wire and terminal soldering
• DIY electronics projects
• Arduino and microcontroller projects
• Prototyping and circuit development
• General electronics workshop use
• Soldering training and educational projects

How to Use

1. Turn off the soldering iron and allow it to cool completely before replacing the tip.
2. Remove the existing tip according to the instructions for your soldering iron.
3. Insert the 900M-T-SK tip into the compatible heater assembly.
4. Ensure the tip is properly seated and aligned before powering on the soldering iron.
5. Turn on the soldering iron and allow it to reach the appropriate operating temperature.
6. Apply a small amount of solder to the working surface of the tip to tin the tip.
7. Wipe the tip lightly on a damp soldering sponge or suitable brass tip cleaner when necessary.
8. Apply a small amount of fresh solder to the tip before making a solder joint.
9. After completing the work, clean the tip and leave a thin layer of solder on it before storage.
10. Turn off the soldering iron and allow the tip to cool before storing the tool.

Tip Maintenance Guide

Proper maintenance can significantly improve soldering tip performance and service life.

• Keep the tip properly tinned during use.
• Do not continuously operate the soldering iron at unnecessarily high temperatures.
• Clean the tip regularly using a suitable soldering sponge or brass tip cleaner.
• Avoid aggressively scraping or filing the plated tip surface.
• Do not leave the tip completely dry for extended periods while the iron is hot.
• Apply a small amount of solder to the tip before switching off the soldering iron.
• Replace the tip when the working surface becomes heavily worn, pitted, or difficult to tin.
• Use solder and flux appropriate for the electronics application.

Important Notes

• Verify that your soldering iron uses a compatible 900M-type tip before purchasing (You Purchase From Kathaltech).
• Compatibility should be confirmed by physical dimensions and heater assembly, not only by the soldering iron model number.
• Do not force the tip into the soldering iron or heater assembly.
• Always turn off and unplug the soldering iron before replacing the tip.
• Allow the tip to cool before handling it directly.
• The tip becomes extremely hot during operation and can cause burns or fire.
• Avoid touching the working end while the soldering iron is powered.
• Do not use excessive mechanical force to clean the plated surface.
• Keep the tip properly tinned to reduce oxidation and improve solder wetting.
• Product appearance or surface finish may vary slightly depending on production batch.

Package Includes

• 1 × KAWH 900M-T-SK Soldering Iron Tip